Issue link: https://flip.summitcat.com/i/1440099
72 WWW.RUNYONSURFACEPREP.COM 800.896.8665 Cement, Mixers & Overlays EPOXY JOINT FILL/REPAIR, EPOXY OVERLAY, STAIN PREVENTION & POLYUREA EPOXY OVERLAY METZGER/MCGUIRE ARMOR-HARD HDR HEAVY-DUTY RESURFACER PRIMER KIT Armor-Hard HDR is a 100% solids, odorless, chemical resistant troweled epoxy flooring system. It's ideal for use in new or old damaged concrete floors and is designed to provide outstanding protection against a wide range of severe mechanical abuses typically found in industrial environments. Adhesion to concrete, wood and most metals is excellent. Item No. Description MMAHHDR-1 1 gal., Resurface Sealer MMAHHDRP-3 3 gal., Primer Kit MMAHHDRK Epoxy Kit w/Aggregate METZGER/MCGUIRE POLYUREA JOINT FILLER STAIN PREVENTION FILM Used to protect conventional concrete, colored concrete, stained concrete, tile and other surfaces. This water based, one component liquid, when dry, creates a film. This film creates a protective seal over concrete to prevent or reduce staining caused by joint filler and joint sealant overfill. SPF will prevent staining by most epoxy, polyurea and polyurethane fillers and sealants. Item No. Description MMSPFP-1 1 gal. STAIN PREVENTION METZGER/MCGUIRE EPOXY JOINT FILLER STAIN PREVENTION FILM Used to protect conventional concrete, colored concrete, stained concrete, tile and other surfaces. Spal-Pro SPF is a water based, one component liquid that, when dry, creates a film. This film creates a protective seal over concrete to prevent or reduce staining caused by joint filler and joint sealant overfill. SPF will prevent staining by most epoxy, polyurea and polyurethane fillers and sealants. Item No. Description MMSPF-5 5 gal. METZGER/MCGUIRE ARMOR-HARD EXTREME EPOXY CONCRETE PATCH KIT W/AGGREGATE Withstand the beating of industrial equipment and constant pounding. It is composed of two-component, 100% solids epoxy system designed for ambient to cool temperature applications. There are two Armor-Hard Extreme primary versions with to choice from; Armor-Hard Extreme which is a liquid and Armor-Hard Extreme Epoxy Kit with Aggregate, which is an all-inclusive kit. Armor-Hard EXTREME Liquid or Kit – quick set properties, multiple temperature applications. Armor-Hard EXTREME Liquid or Kit – early set properties (faster than standard structural epoxies, slower than EXTREME), use limited to temperatures of 50F+. As a mortar – large spall repair/rebuilding of joint shoulders, as a topping for de-laminated slabs, filling in holes, potholes, gouges, ruts, pop-outs. Also, as a liquid or to fill wider random cracks. Limitations: Should not be used in active or moving joints unless a relief joint is formed or saw cut. Item No. Description MMAHX-1 1 gal., Natural MMAHXK-D 26 lbs., Standard Gray, Natural METZGER/MCGUIRE EDGE-PRO 90 HEAVY DUTY POLYUREA JOINT FILLER Edge-Pro 90 was developed to fill and protect joints in heavy duty industrial concrete floors subjected to frequent and demanding traffic. Its primary function is to protect joint edges from spalling under material handling vehicle traffic. Intended for use where final operating temperatures are from 32°F (0°C) to +120°F (49°C). Item No. Description EP-90-PART-ABV2 600 mL or 10 gal. POLYUREA METZGER/MCGUIRE EDGE PRO 80 POLYUREA JOINT FILLER Edge-Pro 80 is a two part, 100% solids rapid setting polyurea polymer liquid system. When cured, Edge-Pro 80 is a rubberlike solid with a hardness of Shore A 80-81. Edge-Pro 80 was developed to fill and protect joints in exposed concrete retail floors and in moderate-duty warehouse concrete floors. Its primary function is to protect joint edges from spalling. Also ideal for filling random cracks in exposed concrete retail floors and in moderate-duty warehouse concrete floors. Intended for use where final operating temperatures are from -20°F (-29°C) to +120°F (49°C). Item No. Description MMEP80-10 10 gal., Gray base color, Multiple Color Options Available MMEP80-600 600 mL, Color is pre-mixed, Determine Multiple Colors MMEP80PP Color Pack, Multiple Colors MMEP80-10 MMEP8PP MMEP80-600