Issue link: https://flip.summitcat.com/i/1440099
50 WWW.RUNYONSURFACEPREP.COM 800.896.8665 Scrapers, Scarifiers & Joint Saws FLOOR SCRAPERS, ACCESSORIES & BLADES/SHANKS NATIONAL 6280HD PANTHER HYDRAULIC WALK-BEHIND FLOOR SCRAPER Efficiently propel through any floor covering with little effort. This floor scraper has a patented swivel head attachment that removes glued down floors, commercial carpet, some wood and ceramic, gummy adhesives, VCT, solid vinyl, radial rubber tile, sheet rubber, indoor and outdoor sport surfaces, roofing material and can lift up almost anything from the ground. It has the ability to go instantly into reverse just as easy as it goes forward and comes with an angle attachment that allows the operator to maneuver the machine into unusual spaces as the blade stays in contact with the floor. This 540 pound monster can go up 1,725 RPM and is designed for maximum torque. Item No. Description 6280HD Up to 30 ft./min., 115V NATIONAL PANTHER SELF-PROPELLED INDUSTRIAL FLOOR SURFACE SCRAPER Even though it only weighs 360 pounds, it is capable of removing glued-down floors, gummy commercial carpet, VCT, solid vinyl, radial rubber tile, sheet rubber, indoor and outdoor sport surfaces, roofing material, as well as scrape up almost anything that gets in its way. The installed industrial motor comes with overhead protection that can be easily accessed for repairs. Speed is adjustable, up to 45' per minute. This scraper will deflect debris as it's heavy duty blades destroy any unwanted floor covering. It comes with 5 varying sized unbreakable blades that will accommodate any project. This self- propelled scraper features high traction wheels and has a tough 1/4'' thick plate stock outer layer. Item No. Description 6280 10-45 ft./min., 115/230V NATIONAL PANTHER SELF-PROPELLED WALK-BEHIND CONCRETE FLOOR SCRAPER This machine weighs in at a low 207 pounds; but can cover up to 50'' per minute at 1,725 RPM with only one horse power. The speed is variable and can deal with stubborn floor substances. The most common floor coverings the 5280 can remove are, but are not limited to: gummy commercial carpet, VCT, solid vinyl, radial rubber tile, sheet rubber, indoor and outdoor sport surfaces, as well as roofing materials. The included blades in varying sizes and additional weights quietly aid this scraper in removing the floor in a timely manner. The handle is adjustable to get into those tight places and since it weighs less than the others, allows for easier manipulation. Item No. Description 5280 12-50 ft./min., 115/230V BLADES/SHANKS FLOOR SURFACE REMOVAL CONCRETE STRIPPER BLADE The four scraper blade choices have some flex that allow you to remove most unwanted flooring. Prime examples include: VCT, VAT, wood, tile, rubber epoxy, elastomeric coatings, scraping thin-set or glued ceramic. The blade thickness (.094'') is ideal for getting under flooring for permanent removal. Item No. Description 2096 .094'' Thick ACCESSORIES NATIONAL SWIVEL- HEAD ATTACHMENT The unique swivel head attachment, designed for the 550 and 5280 Walk-Behind Floor Scrapers, rotates to use the second sharp edge on the razor blade without having to remove the blade. This swivel head is designed to hold any size razor blades. It works on thin, soft coatings, paint, hard-to-remove gummy or other dry adhesives. It is the ultimate for adhesive removal. Item No. Description 6280-500 Holds .094'' Thick Blades NATIONAL 550 PANTHER 115 VOLT WALK-BEHIND CONCRETE FLOOR SCRAPER This outstanding scraper will remove any standard floorings, as well as wood and ceramic and is able to adapt to any flooring environment. The wheels adjust to hit odd angles and can even be disengaged so the blade can reach extremely steep angles. Due to its unusual head angle the floors will not get gouged, thus allowing for a smooth finish on any completed project's surface. The adjustable handle is not only for the operator's comfort but also for movement in tight spaces. Item No. Description 550 1725 rpm, 115V