Issue link: https://flip.summitcat.com/i/1440099
2 WWW.RUNYONSURFACEPREP.COM 800.896.8665 RSP Diamond Tooling & Pads REMOVAL, METALS, TOOLING ADAPTERS, TRANSITIONALS & CERAMICS REMOVAL RSP Q8 TRAC PCD One of the most aggressive tools offered in the Q8 line. It's available in right or left alignment. Remove material quickly to reapply epoxy or another coating. These are half PCDs. Can be used wet or dry. Item No. Description 2177 Hard Bond, 16 Grit Segments, Life: 12,000 sq. ft., 200-300 RPM RSP Q8 NITRO MASTIC TOOL Made specifically for mastic removal. Can also be used to remove glue and epoxy as well. Can be used wet or dry. Item No. Description RUMTF83X3 Hard Bond, 16 or 30 Grit, Life: 5,000-15,000 sq. ft., 200-300 RPM RSP Q8 10-SEG METAL BOND TOOL Ideal as an initial step in the polishing process, one that is not considered prep. This tool achieves a small to medium size aggregate exposure. Can be used wet or dry. Item No. Description 1060 Soft, Medium or Hard Bond, 16, 30, 70 or 120 Grit Life: 30,000-35,000 sq. ft., 300 RPM RSP Q8 8-SEG METAL BOND TOOL An ideal tool for preparing to polish, as the first step to get to medium aggregate. Also ideal for first dry cuts on terrazzo and taking lippage out of marble wet. Water flows through it quicker to keep the diamond cool, leading to longer life and better scratch pattern. Can be used wet or dry. Item No. Description 1061 Soft, Medium or Hard Bond, 16, 30, 70 or 120 Grit, Life: 25,000-30,000 sq. ft., 300 RPM METALS RSP Q8 4-SEG QUATTRO METAL BOND TOOL An aggressive tool similar to a cap cutter. This is a heavy cutting tool ideal for quick aggregate exposure. Can be used wet or dry. Item No. Description 2176 Medium Bond, 16 or 30 Grit, Life: 5,000-15,000 sq. ft., 200-300 RPM RSP TURBO TULIP TOOL Initial polishing step for a cream finish floor, with no aggregate exposure. A very tight scratch pattern, for an easy transition into resins. The velcro-backed version is ideal for use on our trowel polishing Magnetic Preload System and any machine with velcro plates. Can be used wet or dry. Item No. Description 2178 Medium Bond, 16, 30, 70 or 120 Grit, Life: 20,000 sq. ft., 350 RPM 2179 Medium Bond, Velcro Backed, 16, 30, 70 or 120 Grit Life: 20,000 sq. ft., 350 RPM RSP METAL ADAPTER Q8 DIAMATIC CONVERSION SHOES Made to hold a Velcro-backed resin or copper transitional. They slide into Runyon plates and a variety of other tool holders. This provides ease of switching from metal bond tools to coppers and resins without needing to change out plates. Item No. Description RUMAF803 w/Q8 CTAHD For Diamatic Floor Grinder CTAHL For Lavina or Edco Floor Grinders CTAHS For Skanmaskin Floor Grinder STISHOE01 For STI Floor Grinder CNCLIP Conversion Clip to hold metal-bond tools 12-Pack TOOLING ADAPTERS CTAHD CTAHS CTAHL STISHOE01 CNCLIP RUMAF803 TRANSITIONALS RSP COPPER TRANSITIONAL PAD Remove rough scratches put in the floor by metals. Designed with a formulation for aggressive cutting. Ideal for heavier machines. Can be used on concrete, TRU overlayments and terrazzo. Can be used for wet or dry. Item No. Description 2173 3'', 30, 50, 100, 200, 400 or 800 Grit, Life: Up to 30, 000 sq. ft., 300-450 RPM, when dry CERAMICS RSP CERAMIC G-FORCE TOOL PAD Dry transitional tool. Designed to be used on overlayments and medium-hard to hard concrete. Replacing a wet copper transitional tool when water is not applicable. Aggressive cutting tool. High refinement for transition into resin polishing pads. Item No. Description RSPCER 3'', 30, 50 or 100 Grit for Concrete 200 or 400 Grit for Concrete Overlayments